Moonshine cleaning with activated carbon: effective, simple and fast

2024 Author: Isabella Gilson | [email protected]. Last modified: 2023-12-17 03:14

Despite the fact that the moonshine obtained after distillation can be considered a relatively pure product, it needs additional filtering. Of course, a certain amount of harmful impurities will still remain in the composition, but for the most part it will be possible to get rid of. Let's talk about how moonshine is cleaned with activated carbon and whether it is possible to achieve the desired results in this way.

How to rid the product of impurities?

Experienced distillers know all the intricacies of this process, but even a beginner should understand what's what. Firstly, the resulting moonshine must be diluted with water, preferably crine or purified tap water. This should be done in such a way as to get an average of 40-45 degrees. Next, it is necessary to remove gases and other impurities from the composition, which significantly reduce the overall quality.moonshine. For this, ash, activated carbon, charcoal and other absorbents can be used. Other methods can be used by the people, but it is difficult to say something about their effectiveness, since the product is not tested for the absence or presence of impurities. However, activated carbon filtration is the most popular and affordable method. Fortunately, almost everyone has this absorbent, and if not, then you can buy it at any pharmacy or even a supermarket.

Effective and inexpensive cleaning

Everyone knows the properties of activated carbon - it is the removal of unpleasant odors and the absorption of harmful substances, such as slags. However, not every product is suitable for us. You can not use coal obtained from the bones of animals, since its micropores absorb only small molecules, and in moonshine there are inclusions such as fusel oils that cannot be removed by this method. The product obtained by pyrolysis is best suited for the implementation of our goals. Recall that this is a process of decomposition of wood, which takes place under exceptionally high temperatures. In most cases, cleaning moonshine with activated charcoal tablets is ineffective, due to the fact that this product is made from animal bones and its absorbent properties are quite low. But where can we find the coal we need, you ask. Everything is quite simple here, it can be found in water or aquarium filters, gas masks. In principle, it will also be easy to buy it, and its cost is affordable for every buyer.

How to make a filter?

Just throwing coal into a jar of moonshine would be pointless, so there is a whole technology. It all depends on which product you decide to use. If it is cleaning moonshine with activated carbon (tablet), then everything is an order of magnitude simpler, but it can be coals obtained on its own. In principle, regardless of the chosen method, the essence remains the same. You need to grind coal as best as possible. Further on the bottom of the jar you need to put a thin layer of cotton wool, on top of 7-10 centimeters of coal and again cotton wool. Approximately 50 grams of absorbent should be taken per liter of product, so a 3-liter jar will need 150 grams, which is quite a lot. For about a week, moonshine should stand in this state, it is advisable to mix it periodically. As you can see, cleaning moonshine with activated carbon is quite simple. Again, if you use pills, you will need relatively many of them, and the effect will not be the best. But the carbon used for filters will give a much better result.

How to get clean moonshine: cleaning recipes from the people

One of the most popular and cheapest cleaning methods of the people is to use fruit coals from a campfire. For example, you can first fry a barbecue on them, and then apply it as an absorbent. Do not be surprised if after this method the moonshine will have a slightly perceptible smell of a fire. Another option is cleaning with beech timber. First beech gooddried, then sawed and crushed. It is best to place it on a steel grid and leave it above the fire. Smoldering coals must be put in a saucepan and covered with a lid so that they "fit" without air. Then grind and make a filter according to the principle of cotton wool - coal - cotton wool. Of course, you can not complicate your life and not put cotton wool, but you will need to pour the moonshine through cheesecloth so that there is no coal left.

Conclusion

As you can see, there are many ways to get a pure product, but the most popular and easiest way is coal purification of moonshine. Today there are shops for winemakers and moonshiners, where charcoal is sold at a price of 300 rubles per bucket, which is not so expensive. This should be enough for you for a long time, although a lot depends on how much product you make per day. If you use coals after a fire, then be careful, as there may be foreign inclusions. If they get into a jar, they will dissolve over time and spoil the taste. Well, that's all that can be said about the advantages of coal purification of moonshine. Which of the above methods to use, and which not, is up to you.