How to remove pits from cherries? Helpful Hints

2024 Author: Isabella Gilson | [email protected]. Last modified: 2023-12-17 03:14

Cherry pits are known to contain hydrocyanic acid, a toxic substance that, when ingested in large quantities, causes poisoning. Therefore, no matter how uninteresting the extraction of bones is, they must be removed, especially if compote or jam is planned to be stored in jars for more than a year. In this difficult matter, all means will only help.

How to remove pits from cherries manually without special devices

To get rid of bones as quickly as possible, the whole family, including children, is involved in the process of their removal. In this case, the easiest and most common way is to extract them manually. How to quickly remove pits from cherries without the help of special tools? Everything is elementary: the index finger is inserted into the hole where the twig was attached, and with its help the bone is removed.

This method, although considered simple, not requiring the purchase or preparation of special devices, is completelywasteful. Fingers, in addition to the bone, squeeze out a large amount of cherry pulp and juice. In addition, the hands after this procedure remain red for a long time from cherry juice. Therefore, in order to qualitatively remove pits from cherries at home, it is better to use other, more rational methods.

Using hairpins

Every woman in the house should have a simple hairpin. With it, you can quickly and with the least loss, in the form of cherry juice and pulp, remove pits from cherries.

The hairpin with an arcuate base is inserted into that part of the berry where the twig was. The bone, in a circular motion, clings to the base and is pulled out with a hairpin. In this way, you can easily and quickly process a large amount of cherries. But still, it will take at least 10 minutes to peel one kilogram of berries.

Pin or paperclip?

An alternative to a hairpin is a regular safety pin and a paper clip. Their operating principle is the same. The arcuate base of the pin or hairpin is inserted into the hole in the cherry in the place where the stalk was attached, and the stone is pulled out. It should be noted that you need to use not the part of the pin where the clasp is located, but the opposite.

These are the most affordable methods for pitting cherries. The use of such unpretentious devices can save a lot of time, while the juice does not splatter in different directions.

Garlic pitting machine

You can also use a garlic press to remove pits from cherries. For this, the simplest inexpensive model with a special through hole is suitable. Her photo is shown below.

How to quickly remove pits from cherries with a garlic press? Cherry is inserted into the hole located on the handle on one side, with the place of attachment of the stalk up. When you press the handle, the pin, which is located on the opposite side, is pushed into the hole and squeezes out the bone. The operation of all similar mechanical devices for processing cherries from stones is based on this principle.

Easy way to pit cherries

For this method you will need a bottle with a narrow neck and a stick (you can take a stick for sushi or a cocktail tube). How to remove stones from cherries with their help?

A cherry is laid out on top of a narrow neck, with a hole from the fastening of the stalk up. In this place, you need to press with a stick and pierce the berry. Thus, the stone will be in the bottle, and the peeled cherry will remain on the neck. A wooden stick, a cocktail straw or a match - any object that can push the stone out of a cherry will do.

Mechanical pitting machine for cherries

Since it is quite difficult to manually remove the stones from cherries, special mechanical devices were invented to facilitate the work of housewives. Outwardly theythey look different, but the principle of operation is the same for everyone.

The machine for removing pits from cherries is arranged as follows. Each berry is placed separately in a special place with a through hole, after which the bone is pushed out by simple pressure. This method has undoubted advantages. Firstly, in order to pull out the bone, you do not need to catch it with a hairpin, pin or fingers. In any case, it will be squeezed out of the berry. Secondly, even in such a matter as removing stones from cherries, skill is needed, and with the help of this device, it will take very little time to complete this action.

This mechanical pitting method, like all previous ones, has several visible drawbacks. Each berry must be exactly put into the separator with the stalk up. In addition, the hands in any case are dirty. Plus, with this removal of seeds, there are losses in the form of pulp and juice.

Today, the only true alternative to the previously proposed methods is the removal of seeds using a special device designed for a large volume of berries.

Special machine for removing pits of cherries

For processing a large volume of berries at home, a special mechanical device for removing pits "Cherry" is suitable. It is made from food grade plastic. It has a tray where the berries intended for processing are poured, and a container for the removed seeds. Ready peeled berriesfall into the container substituted for the device. The main advantage of such a device is that it minimizes hand contact with juice.

The cherry pitting machine has a rubberized backing at the bottom, which allows you to firmly fix it on the table. This is very convenient compared to other handheld devices.

How to pit cherries? Clean dried berries are placed in the tray located at the top of the device. Now, with one click on the ejector, the processed finished cherries are poured through the groove into the substituted container, and the bones are in the container at the bottom of the device.

Using a special machine for processing cherries from stones allows you to make the most efficient use of your free time, since this method is the most efficient and effective.

In large-scale production, automatic machines are used for processing berries. They are designed to remove the stones of a large volume of cherries (up to 90 kg per hour). Such heavy machines are not used at home.

How to make your own pit remover?

Many craftsmen prefer not to buy an expensive device, but to make it themselves, especially since the principle of their operation is the same. With it, you can quickly remove the seeds from cherries.

The device is made from a tube with a diameter of 22 mm and a wall width of not more than 1 mm. It can be metal, for example, aluminum, fromstainless steel or plastic. It is important that the metal used to make the pipe does not oxidize as this can affect the taste of the berries.

Spring can be taken from a mechanical toy. It should provide soft operation of the device: push well and quickly rise to the opposite position.

A self-made machine consists of a small pipe about 7 cm long and 22 mm in diameter, a special hole with a diameter of 10 mm where the berry will be placed, and a pusher with a spring, which can be used as an ordinary nail. The principle of operation of such a device resembles a ballpoint pen that works on a spring. With one push of the pusher, the stone is squeezed out of the cherry, after which it returns to its original position.

All the methods proposed above on how to remove seeds from cherries are effective in their own way. In addition, each hostess will choose the most suitable optimal option for herself.